33kv Intermediate Crossarm / U Channel Steel / Angle Steel for Pole Line Hardware

• Customization: Available
• Technics: Welding
• Standard: Non-GB
• Usage: Line Fittings
• Type: Pull-Line Fitting
• OEM: Accept
• Sample: Availble
• Name: Pole Line Hardware
• Transport Package: Carton, Pallet, Wooden Case
• Specification: Galvanized Insulator Spindle
• Trademark: Awpoer
• Origin: Hebei, China
• HS Code: 73181590
• Production Capacity: 500 Ton Per Month

Product Description

Product Description

Angle cross arm made of Q235 steel have hot dip galvanized finish with fully smooth surface.
Features:                                                         

• Finish: removed all burrs and sharp edges
• Galvanized: after drilling of holes
• Temperature: -10°C up to +60°C
• Standard: ASTM A153

Product specification:

L angle dimension mm	Thickness (mm)	L angle dimension mm	Thickness (mm)
20×20	3, 4,	100×100	6, 7, 8, 10, 12
25×25	2, 4	110×110	7, 8, 10, 12
30×30	2, 3, 4	120×120	8, 10, 12
40×40	3, 4, 5	125×125	8, 10, 12
45×45	4, 5	130×130	10, 12, 13, 14, 16
50×50	3, 4, 4, 5, 6	150×150	10, 12, 14, 15
56×56	4, 5	140×140	10, 12, 14
63×63	4, 5, 6, 8	160×160	10, 12, 14,16
70×70	5, 6, 7, 8	180×180	12, 14, 16, 18
75×75	5, 6, 7, 8, 9, 10	200×200	14, 16, 18, 20, 24, 25
80×80	5, 6,7, 8, 10	175×175	12, 15
90×90	6, 7, 8, 10	250×250	25, 35

Processing method:

1. Cut off the angle steel The most common is to cut the angle steel as needed. We use a new vertical angle steel cutting machine, which is simple and convenient without the worker bending over when feeding the material.
2. Bend the angle steel by 90 degrees This is also often used in the process of using angle steel. We use a hydraulic angle steel bending machine for processing. There are two forms of internal bending and external bending

 

 

FAQ

 

 

1. What certificate does your company have?
Our company has international certificates below: 
A. Quality management system certificate complies with GB/T 19001-2016/ISO 9001: 2015 requirements; 
B. Environmental management system certificate complies with GB/T 24001-2016/ISO 14001: 2015 requirements; 
C. Occupational health and safety management system certificate complies with ISO 45001: 2018 requirements. 

2. Is your company a factory or a trader? What products can be provided?
We are a company of manufacturer of Fiber optical cable fitting, ADSS OPGW Tension & suspension set, Preformed dead end guy grip, FTTH accessories,  Overhead transmission line fitting, Pole line hardware, Electrical HDG steel cross arm, Stay rod assembly, Bolts nuts, washers, and Electric power fitting. 

3. What are the materials of your products? Can do other materials? 
For our preformed guy grip dead end products are mostly made of galvanized steel wire or alloy clad steel wire, aluminum alloy wire for armor rods. Sometimes, customers want copper preformed materials, we indeed made it before. 
However, we still listen to customers if different materials are required. 

4. Can your company provide drawings? 
Yes, we can. Drawings are a way of confirming the parameters of the products. By providing drawings, we can avoid mistakes. Sometimes, customers sent some pictures with measuring, we engineer can draw a very good technical drawing based on it. 

5. Can you provide a Certificate of Origin? Or invoices certified by Embassies? 
We have been already recorded and registered in the Commodity Inspection and Quarantine Bureau and the Embassy, so we are qualified to issue certificates of origin and invoices for different countries.

6. When customers show the target price or price from other suppliers, can you agree that? 
We are happy when clients give us their advice about the buying price, that means, customers have interested to our company and products, and may in some way, also have trust in us. In this way, it's no doubt to carefully check the target price from customers, and listen to their requirements of quality. Give the best solutions.