UV Resistance Side Ties High Quality PVC Ties for Insulators

Product Description

Product Description

 

Description:

PVC plastic double line /top ties are intended for use with covered conductors and vertically-mounted tie top insulators on cross arms or pole-top-mounted insulators. When utilized within double cross arm construction as illustrated, Line angles of up to 0°to 30°can be comfortably accommodated.

 

Material:

PVC plastic double line /top ties are made from white PVC. This material was selected for UV resistance, tensile strength, impact strength, flexural strength, and self-extinguishing properties.

 

Application: voltage to 15kV

 

Mechanical: PVC plastic double line /top ties will develop unbalanced and lift-off loads equivalent to, or in excess of, a hand tie over the covered conductor.

 

Insulators: Φ57mm (C Neck), Φ73mm (F neck), and Φ101.6mm (K neck); PVC plastic single line/top ties are used with either ANSI compliant polymer or porcelain insulators.

Model			Conductor diameter range(mm)		Color code
C Neck (Φ57mm)	F Neck (Φ73mm)	K neck(Φ101mm)	Minimum	Maximum
PDDB-57-1016	PDDB-73-1016	PDDB-101-1016	7.52	10.16	White
PDDB-57-1372	PDDB-73-1372	PDDB-101-1372	10.19	13.72	Green
PDDB-57-1854	PDDB-73-1854	PDDB-101-1854	13.74	18.54	Blue
PDDB-57-2337	PDDB-73-2337	PDDB-101-2337	18.57	23.37	Orange
PDDB-57-2794	PDDB-73-2794	PDDB-101-2794	23.39	27.94	Red
PDDB-57-3302	PDDB-73-3302	PDDB-101-3302	27.97	33.02	Black

 

 

 

Company Profile

 

Packaging & Shipping

 

FAQ

 

1. What certificate does your company have?
Our company has international certificates below: 
A. Quality management system certificate complies with GB/T 19001-2016/ISO 9001: 2015 requirements; 
B. Environmental management system certificate complies with GB/T 24001-2016/ISO 14001: 2015 requirements; 
C. Occupational health and safety management system certificate complies with ISO 45001: 2018 requirements. 

2. Is your company a factory or a trader? What products can be provided?
We are a company of manufacturer of Fiber optical cable fitting, ADSS OPGW Tension & suspension set, Preformed dead end guy grip, FTTH accessories,  Overhead transmission line fitting, Pole line hardware, Electrical HDG steel cross arm, Stay rod assembly, Bolts nuts, washers, and Electric power fitting. 

3. What are the materials of your products? Can do other materials? 
For our preformed guy grip dead end products are mostly made of galvanized steel wire or alloy clad steel wire, aluminum alloy wire for armor rods. Sometimes, customers want copper preformed materials, we indeed made it before. 
However, we still listen to customers if different materials are required. 

4. Can your company provide drawings? 
Yes, we can. Drawings are a way of confirming the parameters of the products. By providing drawings, we can avoid mistakes. Sometimes, customers sent some pictures with measuring, we engineer can draw a very good technical drawing based on it. 

5. Can you provide a Certificate of Origin? Or invoices certified by Embassies? 
We have been already recorded and registered in the Commodity Inspection and Quarantine Bureau and the Embassy, so we are qualified to issue certificates of origin and invoices for different countries.

6. When customers show the target price or price from other suppliers, can you agree that? 
We are happy when clients give us their advice about the buying price, that means, customers have interested to our company and products, and may in some way, also have trust in us. In this way, it's no doubt to carefully check the target price from customers, listen to their requirements of quality. Give the best solutions.